ATF Stop Leak

API:
Volume: 443ML

EXN -ATF STOP LEAK’s additive is designed not only swell the rubber seal and O-ring but keep them elastic to stop the transmissions leak. Effectively to prevent future major leak by condition the the old or dried seal, reduces the slack squeal and hard spot that may create a worn to transmission’s seal. It prevents the ATF from oxidation and aging hence extend the transmission life.

Click here to view Product Data Sheet
SKU: E-CC-ATF -SL Categories: ,

Additional information

Usage Frequency & Direction

Check the ATF level when engines in normal operating temperature.
Pour in 443 ml EXN – ATF Stop Leak to the specified level. Do not overfill.
Leak normally stop after 5 days driving.
Check again the ATF level to see the leak have stopped. Do not check dripping under the car.
If leak continues occurred, mechanical action is adviseable to replace the seal.
NOTE: DO NOT USE IN A MANUAL GEARBOX, DCT & CVT

Application

• Suitable for vehicle with mileage above 100,000 KM
• Suitable for use in a wide range of car and truck with mineral of synthetic auto transmission fluid
• Off-Highway heavy-duty ATF

Benefits

* Improves shifting
* Reduces the friction and wear
* Resist varnish and gums
* Extend tranmission life
* Reduces noise

Specification and Approvals

Technical Data Properties

PARAMETER METHOD UNIT TYPICAL RESULT
Color ASTM D1500 Red
Density @ 15oC ASTM D4052 kg/m3 0.870
Kinematic Viscosity @ 40ºC ASTM D7042 mm²/s 35.5
Flash Point IP 523 °C 60
Pour Point ASTM D97 °C -38

Product Performance Claim